View NL08JT-15N_3901404.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

highly reliable wound chip inductors for ve been developed in response to the trend these revolutionary, automatic mounting, ha toward high density in electronic equipment. with metal terminals and a body of heat resistant resin, these inductors offer many superior features. f eature ? very st wave so rong solderability by flow soldering, soldering iron or ldering. ? hly resistant to pull forces. perature change ? highly accurate dimensions, can be mounted automatically. terminals are hig ? highly resistant to mechan ical shocks and pressure. ? highly reliable in environments of sudden tem and humidity. super q characteristics. a pplicati on ? microtelevisi ons, liquid crystal televisions, video cameras, portable vcrs, car radios, car stereos, thin tape radios, television tuners, mobile telephones, radio and other electronic devices. d imensions nl05series?20 16 14 ends dimensions in mm terminal wrap around approx. 0.015 /0.38mm both unit a b max. max. c max. d ref. e f g mm 1.27 0.51 1.02 2.29 1.73 1.52 0.51 nl08 series?25 20 18 dimensions in mm unit a b max. max. c max. d ref. e max. f ref. mm 2.92 2.79 2.1 0.51 2.92 0.51 nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 1 how to order nl 08 j t -- 1n6 sei type dimensions inductance tolerance packaging current inductance type codes dimensions (lxwxh) eia code type codetypes type code type codes inductance nl 05 2.0 x 1.6 x 1.4 mm 0805 j 5% t tape and reel blank normal 1n6 1.6nh 08 2.5 x 2.0 x 1.8 mm 1008 k 10% c large current 82n 82nh 10 3.2 x 2.5 x 2.2 mm 1210 r27 270nh 12 4.5 x 3.2 x 3.2 mm 1812 2r7 2.7uh 20 5.6 x 5.0 x 5.0 mm 2220 100 10uh 101 100uh 102 1,000uh
w ound chip inductors (ferrite) ? nl05 open t y pe nl10 serie s?32 ? 25 ? 22 nl12 serie s?45 ? 32 ? 32 nl20 serie s?56 ? 50 ? 50 s t andard electrical s pecifications part number indu ct a n ce (
f when orde ring , please specify tol e r ance and p a ckaging code. ex:n l05jt - 1r0 t o lerance : j = 5% packaging : clear t ape and reel (st andard) f l , q , r dc : hp4287a f s r f : hp8753d / hp4291a f operating t e m peratur e rang e ?25oc to + 85 oc t est instrument s : hp4291a impedance / material analyzer i nduct ance vs . freq ue ncy ch aract eri s t i cs 0 0. 2 0. 4 0. 6 0. 8 1 1. 2 1. 4 1. 6 1 1 0 1 00 1000 f r eq uen c y (m hz) l( u h ) 1. 0uh q v s . f r e q ue nc y char ac te rist i c s 0 5 10 15 20 25 1 1 0 100 1000 f r equ e nc y (m hz ) q 1.0u h w ound chip inductors (ferrite) ? nl08 large current series part number indu ct a n ce ( nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 3
wound chip inductors (ferrite) ? nl08 open type s tandard electrical specifications color coding part number i nduct a nce ( ,000 0.25 2,000 black g r e e n b l a c k nl08 ,500 0.25 1,800 brown b l a c k b l a c k nl08 ,400 0.26 1,700 brown r e d b l a c k nl08 ,300 0.28 1,600 brown g r e e n b l a c k nl08 ,200 0.30 1,550 brown gray b l a c k nl08 ,100 0.35 1,500 red red black nl08 ,000 0.40 1,450 red v iolet black nl08 ,600 0.42 1,400 orange orange black nl08 ,500 0.45 1,350 orange white black nl08 ,400 0.50 1,300 yellow violet black nl08 ,300 0.60 1,250 green blue black nl08 ,200 0.65 1,240 blue gray black nl08 ,100 0.75 1,230 gray red black nl08 ,220 brown black brown nl08
wound chip inductors (ferrite) ? nl10 molding type s tandard electrical specifications color coding part number i nduct a nce ( p h) t o lerance ( % ) q min t est fr equenc y (m hz) sel f resonant fr equenc y (m hz)m i n dc resist ance ( ) ma x. rated current (m a ) max. 1 st 2 nd 3 rd nl08 t - 560 56 10 / 5 10 2.52 16 12.1 270 green blue orange nl08 t - 680 68 10 / 5 10 2.52 15 16.6 250 blue gray orange nl08 t - 820 82 10 / 5 10 2.52 13 19 200 gray red orange nl08 t - 101 100 10 / 5 8 0.796 12 21 120 brow n black y e llo w * uv color: bl u e / core color : black f when orde ring , please specify to l e rance and p a ckaging code. ex:n l08jt - 101 t o l e r a n c e : j = 5 % : k = 1 0 % packaging : clear t ape and reel (st andard) . f l , q , r dc : hp4287a f s r f : hp8753d / hp4291a . f operating t e m peratur e rang e ?25oc to + 85 oc t est instrument s : hp4291a impedance / material analyzer t est i nstruments ? hp4 291a im peda nce / materi al analyzer q induc tance v s . freq uen cy c h ar acte r istics 0 50 10 0 15 0 20 0 25 0 30 0 35 0 11 0 f r e q ue nc y ( m hz ) l ( u h ) 2 7uh 39uh 47u h 1 0 0 v s . freq uen cy c h ara cter istics 0 5 10 15 20 25 30 35 40 45 50 11 0 f r e q ue nc y ( m hz ) q 27u h 3 9uh 4 7uh 1 0 0 s tandard electrical specifications part number inductance ( p h) tolerance ( %) q min. test frequency (mhz) self resonant frequency (mhz)min. dc resistance ( )max. rated current (ma) nl10kt-10n 0.010 10 15 100 2,500 0.13 450 nl10kt-12n 0.012 10 17 100 2,300 0.14 450 nl10kt-15n 0.015 10 19 100 2,100 0.16 450 nl10kt-18n 0.018 10 21 100 1,900 0.18 450 nl10kt-22n 0.022 10 23 100 1,700 0.20 450 nl10kt-27n 0.027 10 23 100 1,500 0.22 450 nl10kt-33n 0.033 10 25 100 1,400 0.24 450 nl10kt-39n 0.039 10 25 100 1,300 0.27 450 nl10kt-47n 0.047 10 26 100 1,200 0.30 450 nl10kt-56n 0.056 10 26 100 1,100 0.33 450 nl10kt-58n 0.058 10 27 100 1,000 0.36 450 nl10kt-82n 0.082 10 27 100 900 0.40 450 nl10kt-r10 0.10 10 28 100 700 0.44 450 nl10kt-r12 0.12 10 30 25.20 500 0.22 450 nl10kt-r15 0.15 10 30 25.20 450 0.25 450 nl10kt-r18 0.18 10 30 25.20 400 0.28 450 nl10kt-r22 0.22 10 30 25.20 350 0.32 450 nl10kt-r27 0.27 10 30 25.20 320 0.36 450 nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 5
s t andard electrical s pecifications part number indu ct a n ce ( p h) t o lera nce ( % ) q min. t est freq uenc y (mhz ) self res ona nt frequ e nc y (mhz )mi n . dc resis t a n ce ( )max. rated current (m a ) nl10kt - r 3 3 0 . 3 3 1 0 3 0 2 5 . 2 0 3 0 0 0 . 4 0 4 5 0 nl10kt - r 3 9 0 . 3 9 1 0 3 0 2 5 . 2 0 2 5 0 0 . 4 5 4 5 0 nl10kt - r 4 7 0 . 4 7 1 0 3 0 2 5 . 2 0 2 2 0 0 . 5 0 4 5 0 nl10kt - r 5 6 0 . 5 6 1 0 3 0 2 5 . 2 0 1 8 0 0 . 5 5 4 5 0 nl10kt - r 6 8 0 . 6 8 1 0 3 0 2 5 . 2 0 1 6 0 0 . 6 0 4 5 0 nl10kt - r 8 2 0 . 8 2 1 0 3 0 2 5 . 2 0 1 4 0 0 . 6 5 4 5 0 nl10kt - 1 r 0 1 . 0 0 1 0 3 0 7 . 9 6 0 1 2 0 0 . 7 0 4 0 0 nl10kt - 1 r 2 1 . 2 0 1 0 3 0 7 . 9 6 0 1 0 0 0 . 7 5 3 9 0 nl10kt - 1 r 5 1 . 5 0 1 0 3 0 7 . 9 6 0 8 5 0 . 8 5 3 7 0 nl10kt - 1 r 8 1 . 8 0 1 0 3 0 7 . 9 6 0 8 0 0 . 9 0 3 5 0 nl10kt - 2 r 2 2 . 2 0 1 0 3 0 7 . 9 6 0 7 5 1 . 0 0 3 2 0 nl10kt - 2 r 7 2 . 7 0 1 0 3 0 7 . 9 6 0 7 0 1 . 1 0 2 9 0 nl10kt - 3 r 3 3 . 3 0 1 0 3 0 7 . 9 6 0 6 0 1 . 2 0 2 6 0 nl10kt - 3 r 9 3 . 9 0 1 0 3 0 7 . 9 6 0 5 5 1 . 3 0 2 5 0 nl10kt - 4 r 7 4 . 7 0 1 0 3 0 7 . 9 6 0 5 0 1 . 5 0 2 2 0 nl10kt - 5 r 6 5 . 6 0 1 0 3 0 7 . 9 6 0 4 5 1 . 6 0 2 0 0 nl10kt - 6 r 8 6 . 8 0 1 0 3 0 7 . 9 6 0 4 0 1 . 8 0 1 8 0 nl10kt - 8 r 2 8 . 2 0 1 0 3 0 7 . 9 6 0 3 5 2 . 0 0 1 7 0 nl10kt - 10 0 1 0 1 0 3 0 2 . 5 2 0 3 0 2 . 1 0 1 5 0 nl10kt - 12 0 1 2 1 0 3 0 2 . 5 2 0 2 0 2 . 5 0 1 4 0 nl10kt - 15 0 1 5 1 0 3 0 2 . 5 2 0 2 0 2 . 8 0 1 3 0 nl10kt - 18 0 1 8 1 0 3 0 2 . 5 2 0 2 0 3 . 3 0 1 2 0 nl10kt - 22 0 2 2 1 0 3 0 2 . 5 2 0 2 0 3 . 7 0 1 1 0 nl10kt - 27 0 2 7 1 0 3 0 2 . 5 2 0 2 0 5 . 0 0 8 0 nl10kt - 33 0 3 3 1 0 3 0 2 . 5 2 0 1 7 5 . 6 0 7 0 nl10kt - 39 0 3 9 1 0 3 0 2 . 5 2 0 1 6 6 . 4 0 6 5 nl10kt - 47 0 4 7 1 0 3 0 2 . 5 2 0 1 5 7 . 0 0 6 0 nl10kt - 56 0 5 6 1 0 3 0 2 . 5 2 0 1 3 8 . 0 0 5 5 nl10kt - 68 0 6 8 1 0 3 0 2 . 5 2 0 1 2 9 . 0 0 5 0 nl10kt - 82 0 8 2 1 0 3 0 2 . 5 2 0 1 1 1 0 . 0 4 5 nl10kt - 10 1 1 0 0 1 0 2 0 0 . 7 9 6 1 0 1 0 . 0 4 0 nl10kt - 12 1 1 2 0 1 0 2 0 0 . 7 9 6 1 0 1 1 . 0 7 0 nl10kt - 15 1 1 5 0 1 0 2 0 0 . 7 9 6 8 1 5 . 0 6 5 nl10kt - 18 1 1 8 0 1 0 2 0 0 . 7 9 6 7 1 7 . 0 6 0 nl10kt - 22 1 2 2 0 1 0 2 0 0 . 7 9 6 7 2 1 . 0 5 0 nl10kt - 27 1 2 7 0 1 0 2 0 0 . 7 9 6 6 2 8 . 0 4 5 nl10kt - 33 1 3 3 0 1 0 2 0 0 . 7 9 6 5 3 4 . 0 4 0 t e st instrumen t s: hp 4286a rf i m pedance anal yzer for l ? q ? s r f digit a l multimeter sc- 7401 fo r rdc hp4285a lf im pedance anal y z e r for l ? q che n-hw a 1051+c h en-wha 301a for idc t est instrument s : hp4291a impedance / material analyzer q vs. frequency characteristics 0 10 20 30 40 50 60 70 11 0 frequency (mhz) q 33uh 22uh 47uh inductance vs. frequency characterics 0 20 40 60 80 100 120 140 160 180 1 10 100 frequency (mhz) l (uh) 33uh 22uh 47uh 1 0 0 nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 6
wound chip inductors (ferrite) ? nl12 molding type s tandard electrical specifications part number indu ct a n ce ( nl series ? smd ferrite wound inductor toll free: (888) sei-seis www.seielect.com email: marketing@seielect.com 7
wound chip inductors (ferrite) ? nl20 molding type s tandard electrical specifications part number indu ct a n ce ( ,000 10 3 0 0 . 7 9 6 2 . 5 5 0 . 0 0 3 0 t est instrument s : hp4291a impedance / material analyzer q v s . fre q u e nc y ch aract eri s t i cs 0 20 40 60 80 100 11 0 fre que ncy (mhz) q 12uh 39uh 68uh i nduct ance v s . fre q ue ncy c h aract e r is t i cs 0 50 100 150 200 250 300 11 0 freq uency ( m h z ) l ( u h ) 1 2uh 39uh 68u h 1 0 0 1 0 0 s t andard electrical s pecifications part number indu ct a n ce (mh ) t o lera nce ( % ) q min. t est freq uenc y (mhz ) self res ona nt frequ e nc y (mhz )mi n . dc resis t a n ce ( nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 8
wound chip inductors (ferrite) ? nl series t est instruments : hp4291a impedance / material analyzer q vs. frequency characteristics 0 5 10 15 20 25 30 35 40 0.001 0.01 0.1 1 frequency (mhz) q 4.7uh 5.6uh 6.8uh inductance vs. frequency characteristics 0 1000 2000 3000 4000 5000 6000 7000 8000 9000 0.001 0.01 0.1 1 10 frequency (mhz) 4.7uh 5.6uh 6.8uh l (nh) r ecommended pattern : nl05 serie s-20 1 6 14 nl08 series-2 5 2 018 di m e nsi o ns in mm p a d la yout 1st code 3rd i i 2nd code dimensions in mm dimensions in mm unit h i j unit g h i mm 1.78 1.02 0.76 mm 1.02 1.27 2.54 nl10 series-322522 nl20 series-565050 2 1 1 inducto r patter n i nductor pattern 2 dimensions in mm 2 4 dimensions in nl12 series-453232 3 1. 5 dimensions in 1. 5 patter n induct or nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 9
p ackagi ng t t a p e d i m e n s i o n s a p e d i m e n s i o n s t t a p e m a t e r i a l a p e m a t e r i a l r r e e l d i m e n s i o n s e e l d i m e n s i o n s figur e 1 figur e 2 dimensions in mm t a pe d i mensions r eel d i mensions type a b t w p f k fig a b c d quantity /reel nl05(20 1 6 1 4 ) 1 . 8 8 2 . 3 8 1 . 4 8 8 4 3.5 0 . 2 2 178 60 1 3 9 2,500 nl08(25 2 0 1 8 ) 2 . 6 1 2 . 8 3 2 . 2 5 8 4 3.5 0 . 2 5 2 178 60 1 2 1 . 5 2,000 nl10(32 2 5 2 2 ) 2 . 9 4 3 . 6 4 2 . 5 2 8 4 3.5 0 . 2 1 178 60 1 0 1 . 5 2,000 nl12(45 3 2 3 2 ) 3 . 6 4 5 . 1 4 3 . 6 1 2 8 5.5 0 . 3 1 250 80 1 4 1 . 5 5 0 0 nl20(56 5 0 5 0 ) 4 . 9 5 . 6 5 5 . 3 1 6 . 1 5 1 2 . 2 5.5 0 . 5 2 330 80 2 0 2 1,000 c d b a a p 2
wound chip inductors (ferrite) ? nl series 1-1 m echanical p erformance no item specification test method 1-1-1 vibration appearance: no damage l change: within d 10% q change: within d 30% test device shall be soldered on the substrate oscillation frequency: 10 to 55 to 10hz for 1min amplitude: 1.5mm time: 2hrs for each axis (x, y & z), total 6hrs 1-1-2 resistance to soldering heat appearance: no damage pre-heating: 150 :, 1min solder composition: sn/pb = 63/37 solder temperature: 260 d 5: immersion time: 10 d 1sec 1-1-3 solderability the electrodes shall be at least 90% covered with new solder coating pre-heating: 150 :, 1min solder composition: sn/pb = 63/37 solder temperature: 230 d 5: immersion time: 4 d 1sec 1-2 e nvironmental p erformance no item specification test method 1-2-1 temperature cycle one cycle: step temperature ( : ) time (min) 1 -25d 3 30 2 25d 2 3 3 85d 3 30 4 25d 2 3 total: 100cycles measured after exposure in the room condition for 24hrs 1-2-2 humidity resistance temperature: 40 d 2: relative humidity: 90 ~ 95% time: 1,000hrs measured after exposure in the room condition for 24hrs 1-2-3 high temperature resistance temperature: 85 d 3: relative humidity: 20% applied current: rated current time: 1,000hrs measured after exposure in the room condition for 24hrs 1-2-4 low temperature resistance appearance: no damage l change: within d 10% q change: within d 30% temperature: -25 d 3: relative humidity: 0% time: 1,000hrs measured after exposure in the room condition for 24hrs nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 11
wound chip inductors (ferrite) ? nl large current series d imensions nl08 ? tc series?25 ? 20 ? 18 dimensions in mm unit a b c d e f mm 2.92 +0 2.79 +0 2.1 +0 0.51 2.92 +0 0.51ref nl12 series?45 ? 32 ? 32 nl10 ? tc series?32 ? 25 ? 22 dimensions in mm unit a b c d e f mm 3.70 +0 2.90 +0 2.60 +0 0.51 3.7 0.51ref nl20 series?56 ? 50 ? 50 s tandard electrical specifications part number inductance ( p h) tolerance (%) q min test frequency (mhz) self resonant frequency (mhz)min dc resistance ()max rated current (ma) color coding nl08 tc1r0 1.0 20 15 7.96 200 0.34 700 brown black red nl08 tc1r5 1.5 20 15 7.96 165 0.42 650 brown green red nl08 tc2r2 2.2 20 15 7.96 95 0.50 630 red red red nl08 tc3r3 3.3 20 15 7.96 55 0.65 600 orange orange red nl08 tc4r7 4.7 20 15 7.96 43 0.80 580 yellow violet red nl08 tc6r8 6.8 20 15 7.96 39 1.00 550 blue gray red nl08 tc100 10 10 15 2.52 32 1.69 500 brown black orange nl08 tc150 15 10 15 2.52 21 2.20 450 brown green orange nl08 tc220 22 10 13 2.52 18 2.80 350 red red orange nl08 tc330 33 10 13 2.52 16 4.20 300 orange orange orange f when ordering , please specify tole rance and packaging code. ex:nl08jtc6r8 tolerance : j = 5% : k= 10% packaging : clear tape and reel (standard) . f l , q : hp4287a f s r f : hp8753d / hp4291a . f rdc : digital multimeter sc - 7401 f operating temperature range ?25oc to + 85oc nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 12
wound chip inductors (ferrite) ? nl large current series s tandard electrical specifications part number inductance ( p h) tolerance (%) q min test frequency (mhz) self resonant frequency (mhz)min dc resistance 30% ( ) rated current (ma)min color coding nl10 tc1r0 1.0 5 / 10 20 7.96 100 0.08 1,500 brown black red nl10 tc1r5 1.5 5 / 10 20 7.96 80 0.13 1,125 brown green red nl10 tc2r2 2.2 5 / 10 20 7.96 68 0.13 970 red red red nl10 tc3r3 3.3 5 / 10 20 7.96 54 0.16 837 orange orange red nl10 tc4r7 4.7 5 / 10 20 7.96 43 0.20 675 yellow violet red nl10 tc6r8 6.8 5 / 10 20 7.96 33 0.27 600 blue gray red nl10 tc100 10 5 / 10 15 2.52 28 0.36 520 brown black orange nl10 tc150 15 5 / 10 15 2.52 19 0.56 480 brown green orange nl10 tc220 22 5 / 10 15 2.52 16 0.77 310 red red orange nl10 tc330 33 5 / 10 15 2.52 12 1.10 270 orange orange orange nl10 tc470 47 5 / 10 15 2.52 10 1.64 210 yellow violet orange nl10 tc680 68 5 / 10 15 2.52 9 2.80 189 blue gray orange nl10 tc101 100 5 / 10 15 0.796 6 3.70 145 brown black yellow nl10 tc151 150 5 / 10 15 0.796 5 6.10 120 brown green yellow nl10 tc221 220 5 / 10 15 0.796 4 8.40 100 red red yellow nl10 tc331 330 5 / 10 15 0.796 3.5 12.3 80 orange orange yellow nl10 tc471 470 5 / 10 15 0.796 2.8 22.0 75 yellow violet yellow nl10 tc681 680 5 / 10 15 0.796 2 28.0 65 blue gray yellow f when ordering , please specify to lerance and packaging code. ex:nl10jtc101 tolerance : j = 5% k= 10% packaging : clear tape and reel (standard) . f l , q : hp4287a f s r f : hp8753d / hp4291a . f rdc : digital multimeter sc - 7401 f operating temperature range ?25oc to + 85oc t est instruments : hp4291a impedance / material analyzer i n d uct a nce vs . freque n cy characteri s ti cs 0 100 200 300 400 500 11 0 f r equenc y (m hz ) l ( u h ) 15uh 47u h 68uh 1 0 0 q vs . freque nc y c h aracte r i s ti cs 0 5 10 15 20 25 30 11 0 frequency (mhz ) q 15uh 47 uh 68uh 1 0 0 nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 13
wound chip inductors (ferrite) ? nl large current series s tandard electrical specifications part number inductance ( p h) tolerance ( %) q min. test frequency (mhz) self resonant frequency (mhz)min. dc resistance ( )max. rated current (ma) nl12ktc1r0 1.0 10 10 7.96 200 0.11 1,050 nl12ktc1r2 1.2 10 10 7.96 160 0.12 1,000 nl12ktc1r5 1.5 10 10 7.96 130 0.15 950 nl12ktc1r8 1.8 10 10 7.96 100 0.16 900 nl12ktc2r2 2.2 10 10 7.96 60 0.18 850 nl12ktc2r7 2.7 10 10 7.96 60 0.20 800 nl12ktc3r3 3.3 10 10 7.96 45 0.22 750 nl12ktc3r9 3.9 10 10 7.96 40 0.24 700 nl12ktc4r7 4.7 10 10 7.96 35 0.27 650 nl12ktc5r6 5.6 10 10 7.96 30 0.30 650 nl12ktc6r8 6.8 10 10 7.96 28 0.35 600 nl12ktc8r2 8.2 10 10 7.96 25 0.40 600 nl12ktc100 10 10 10 2.52 22 0.50 550 nl12ktc120 12 10 10 2.52 21 0.60 500 nl12ktc150 15 10 10 2.52 20 0.70 450 nl12ktc180 18 10 10 2.52 19 0.80 400 nl12ktc220 22 10 10 2.52 18 0.90 370 nl12ktc270 27 10 10 2.52 16 1.20 330 nl12ktc330 33 10 10 2.52 14 1.40 300 nl12ktc390 39 10 10 2.52 12 1.60 280 nl12ktc470 47 10 10 2.52 11.5 1.90 260 nl12ktc560 56 10 10 2.52 11 2.20 240 nl12ktc680 68 10 10 2.52 10 2.60 220 nl12ktc820 82 10 10 2.52 9 3.50 200 nl12ktc101 100 10 20 0.796 8 4.00 180 nl12ktc121 120 10 20 0.796 6.5 4.50 160 nl12ktc151 150 10 20 0.796 7 6.50 140 nl12ktc181 180 10 20 0.796 5.5 7.50 120 nl12ktc221 220 10 20 0.796 5.5 9.00 120 nl12ktc271 270 10 20 0.796 5 11.0 100 nl12ktc331 330 10 20 0.796 4 13.0 90 test instruments: hp4286a rf impedance analyzer for l ?q ? srf digital multimeter sc-7401 for rdc hp4285a lf impedance analyzer for l ? q chen-hwa 1051+chen-wha 301a for idc inductance vs. frequency characteristics 0 20 40 60 80 100 120 140 1 10 100 frequency (mhz) l (uh) 15uh 33uh 8.2uh t est instruments : hp4291a impedance / material analyzer q vs. frequency characteristics 0 5 10 15 20 25 30 35 1 10 100 frequency (mhz) rdc:0.40 ?
wound chip inductors (ferrite) ? nl large current series s tandard electrical specifications part number inductance ( ,800 nl20ktc1r2 1.2 10 10 7.96 70 0.035 1,700 nl20ktc1r5 1.5 10 10 7.96 55 0.04 1,600 nl20ktc1r8 1.8 10 10 7.96 47 0.05 1,400 nl20ktc2r2 2.2 10 10 7.96 42 0.05 1,300 nl20ktc2r7 2.7 10 10 7.96 37 0.07 1,200 nl20ktc3r3 3.3 10 10 7.96 34 0.08 1,120 nl20ktc3r9 3.9 10 10 7.96 32 0.09 1,050 nl20ktc4r7 4.7 10 10 7.96 29 0.11 950 nl20ktc5r6 5.6 10 10 7.96 26 0.13 880 nl20ktc6r8 6.8 10 10 7.96 24 0.15 810 nl20ktc8r2 8.2 10 10 7.96 22 0.18 750 nl20ktc100 10 10 10 2.52 19 0.21 690 nl20ktc120 12 10 10 2.52 17 0.25 630 nl20ktc150 15 10 10 2.52 16 0.30 580 nl20ktc180 18 10 10 2.52 14 0.36 530 nl20ktc220 22 10 10 2.52 13 0.43 480 nl20ktc270 27 10 10 2.52 11.5 0.52 440 nl20ktc330 33 10 10 2.52 10.5 0.62 400 nl20ktc390 39 10 10 2.52 9.5 0.72 370 nl20ktc470 47 10 10 2.52 8.5 0.85 340 nl20ktc560 56 10 10 2.52 7.8 1.00 310 nl20ktc680 68 10 10 2.52 7 1.2 290 nl20ktc820 82 10 10 2.52 6.4 1.4 270 nl20ktc101 100 10 20 0.796 6 1.6 250 nl20ktc121 120 10 20 0.796 5.4 1.9 230 nl20ktc151 150 10 20 0.796 4.8 2.2 210 nl20ktc181 180 10 20 0.796 4.4 2.8 190 nl20ktc221 220 10 20 0.796 3.9 3.4 170 nl20ktc271 270 10 20 0.796 3.6 4.2 155 nl20ktc331 330 10 20 0.796 3.2 4.9 140 nl20ktc391 390 10 20 0.796 2.9 5.8 130 nl20ktc471 470 10 20 0.796 2.6 7 120 nl20ktc561 560 10 20 0.796 2.4 8.5 110 nl20ktc681 680 10 20 0.796 2.2 10 100 nl20ktc821 820 10 20 0.796 2 13 90 nl20ktc102 1,000 10 20 0.252 1.8 15 85 test instruments: hp 4286a rf impedance analyzer for l
wound chip inductors (ferrite) ? nl large current series t est instruments : hp4291a impedance / material analyzer inductance vs. frequency characteristics 0 5 10 15 20 25 30 1 10 100 frequency (mhz) 1.0uh 3.3uh 8.2uh q vs. frequency characteristics 0 5 10 15 20 25 30 1 10 100 frequency (mhz) q 1.0uh 3.3uh 8.2uh 1.0uh 3.3uh 8.2uh l (uh) r ecommended pattern : nl08 ? tc series?25 ? 20 ? 18 dimensions in mm unit g h i mm 1.02 1.27 2.54 nl12 ? tc series?45 ? 32 ? 32 nl10 ? tc series?32 ? 25 ? 22 3 dimensions in mm pad layout dimensions in mm pad layout 3 3 3 3 3 3 3 dimensions in mm unit g h i mm 1.00 2.00 2.70 nl20 ? tc series?56 ? 50 ? 50 inductor pattern pattern inductor 2.8 4.5 dimensions in mm 2 2 4 dimensions in mm 1.5 1.5 3 nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 16
wound chip inductors (ferrite) ? nl large current series p ackaging t t ape dimensions a p e d i m e n s i o n s t t ape material a p e m a t e r i a l r r eel dimensions e e l d i m e n s i o n s figure 1 figure 2 dimensions in mm tape dimensions reel dimensions type a b t w p f k fig a b c d quantity /reel 2.61 2.83 2.25 8 4 3.5 0.25 2 178 60 12 1.5 2,000 2.94 3.64 2.52 8 4 3.5 0.2 1 178 60 10 1.5 2,000 3.64 5.14 3.6 12 8 5.5 0.3 1 250 80 14 1.5 500 nl08 (252018) nl10 (322522) nl12 (453232) nl20(565050) 4.9 5.65 5.3 16.15 12.2 5.5 0.5 2 330 80 20 2 1,000 c d b a a p 2 4 k b d 0.1 w 0.2 d d 0.1 d 0.1 d 0. 05 0.1 0. 05 d d 1. t f d 0.05 75 d 0.1 d 0.0 5 carrier tape: polystyrene cover type: polyethylene 160mm min chip mounting blank . blank part part 330mm min. leader cover tape nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 17
wound chip inductors (ferrite) ? nl large current series 1-1 m echanical p erformance no item specification test method 1-1-1 vibration appearance: no damage l change: within d 10% q change: within d 30% rdc: within specification test device shall be soldered on the substrate oscillation frequency: 10 to 55 to 10hz for 1min amplitude: 1.5mm time: 2hrs for each axis (x, y & z), total 6hrs 1-1-2 resistance to soldering heat appearance: no damage pre-heating: 150 :, 1min solder composition: sn/pb = 63/37 solder temperature: 260 d 5: immersion time: 10 d 1sec 1-1-3 solderability the electrodes shall be at least 90% covered with new solder coating pre-heating: 150 :, 1min solder composition: sn/pb = 63/37 solder temperature: 230 d 5: immersion time: 4 d 1sec 1-2 e nvironmental p erformance no item specification test method 1-2-1 temperature cycle one cycle: step temperature ( : ) time (min) 1 -25d 3 30 2 25d 2 3 3 85d 3 30 4 25d 2 3 total: 100cycles measured after exposure in the room condition for 24hrs 1-2-2 humidity resistance temperature: 40 d 2: relative humidity: 90 ~ 95% time: 1,000hrs measured after exposure in the room condition for 24hrs 1-2-3 high temperature resistance temperature: 85 d 3: relative humidity: 20% applied current: rated current time: 1,000hrs measured after exposure in the room condition for 24hrs 1-2-4 low temperature resistance appearance: no damage l change: within d 10% q change: within d 30% rdc: within specification temperature: -25 d 3: relative humidity: 0% time: 1,000hrs measured after exposure in the room condition for 24hrs nl series ? smd ferrite wound inductor toll free: (888) s e i-sei s ww w .se i e l e c t . com e m a i l: m a rk e ting @ s e i e le c t . c om 18

▲Up To Search▲

Price & Availability of NL08JT-15N

	To Download NL08JT-15N Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .